Looking to buy a new truck for my everglades 320. Around 15k loaded. Is anyone pulling this much weight with a 3/4 ton or should I be looking strickly for a 1 ton? Dually? TIA
So I hooked my old style fly by wire control box and the gauges worked. Read the hours on motor but it wouldnt start. Assuming it wont start because the motor was reset to the new controls. The other thing is with the old style box I have to use the device port on the command link hub but with...
I bought a used f300. I had a 250 with command link. I ended up purchasing dec master helm controls single station. I ran the wires as the pic I received from yamaha. I got the controls synced to motor. Prior to getting synced the key would not turn motor over motor but now it will start. The...
bought the boat with motor. motor has over 2000 hours but powerhead was replaced a few years ago. dropped lower unit and exhaust looks clean. When the motor is running it is extremely loud like a 2 stroke. Never heard a 4 stroke that sounds like this. It is definitely coming from the exhaust. No...
I have a 2006 Yamaha f250. I have the square gauges. Just recently the rpm/hour gauge stopped working. It powers on but has no readings. I have another gauge that I hooked up but I had the same result. I do not have extra harnesses laying around to test. Is there another way to check the...
I have a 2006 f250. Started having fuel issues. Replaced filter in vst, F shaped filter and the fuel filter in the cup. I am trying to prime the vst but not sure it is filling. Primer ball is hard. I drain the fuel in vst & get less then a half oz. Took off hose to fuel rail then put gas in vst...
I blew my lower unit a few weeks ago and I am looking for another. I talked with a couple Yamaha techs and they said they wouldn't bother rebuilding but would rather buy a used. They both said a F225 should fit on to my motor. I found a few used F250 for $2000 1 year warranty. I found an...
I was in the Keys last week and on the way in I heard what sounded like some grinding in the powerhead, so I just limped back in. I took the motor to have diagnostics ran. The tech said I was on the verge of disaster and I would need new bearings. The motor has less then 800 hours. I am...
e225fpxsrb
I do not have a key switch and I am trying to fire the motor up. I bybassed the solenid and am getting it to turn over but there is no spark. The motor is in neutral. Is there a neutral saftey wire that I must bypass. I know yamahas have a wire you must jump( I think brown wire) Just...
Changed impeller. Inspected both thermos and they opened at 146-148 degrees. They both only opened 1/4in which I guess is normal, I am used to a merc thermo which opens twice as much. Check poppit and it looked clean. When I was flushing motor I decided to flush from on ear muffs also. The water...
I just bought this motor. It is a 2006 f250tur. I just got done rigging the motor on my boat and fired it up on the hose. When the motor is in gear a few hundred rpms above idle I can hear a rattling noise coming from the lower unit. When I accelerate I do not hear the noise or maybe it is...
I have a 27' Rambo. The hull is similar to a scarab. Narrow and long. 8' beam. I just put a 2006 F250 on the boat. There are so many different size props that I dont know where to start. I would probably be looking for something to get me top speed. Any help would be appreciated.
