Current visitors

Home
Members

pvanv's latest activity

pvanv reacted to MattFL's post in the thread Tohatsu 9.8 MFS (maintenence/storage) with Like.

Really make an effort to find ethanol free fuel, it does make a big difference in how well it stores. I've used StaBil with success...

Tuesday at 9:35 AM
pvanv replied to the thread 2002/2003 NSD70A2 Nissan 70HP TLDI remote control / console gauge wiring question.

Whip out your Factory service manual and the owners manual for help.

Tuesday at 9:31 AM
pvanv replied to the thread Break in oil.

Yep. Use NMMA rated FC-W 10w-30. Verify 1/2 way on dipstick.

Apr 4, 2024
pvanv replied to the thread Tohatsu throttle problem.

I would definitely check inside the carb.

Apr 4, 2024
pvanv replied to the thread Tohatsu throttle problem.

Model 9.8A3? Is it so rich that the full throttle gives it enough air to run? What do the plugs look like?

Apr 3, 2024
pvanv replied to the thread Nissan 9.9 help.

Ugh. Round float carb, or octagon float? Sounds like flooding. Some individual parts are still available. I would verify float height first.

Apr 3, 2024
pvanv reacted to airshot's post in the thread How do I get this ?! Fuel connector off? with Like.

Just looking at the pic, it might be a jury-rigged fuel hookup. I believe someone just ran a fuel hose the the fuel inlet and did not...

Mar 30, 2024
pvanv reacted to Scott Danforth's post in the thread How do I get this ?! Fuel connector off? with Like.

Look under the cowl. Looks like the hose goes thru the grommet

Mar 30, 2024
pvanv replied to the thread 2.5HP Mercury/Tohatsu/Nissan Outboard No Longer Starting.

I would move the clip down, to raise the needle.

Mar 30, 2024
pvanv reacted to MattFL's post in the thread 1990 NISSAN NS9.9B2 with Like.

Unless it's corroded, a new carburetor is likely not needed. For a proper cleaning you have to take it apart. Use the little tube to...

Mar 30, 2024
pvanv replied to the thread 4 HP Nissan Flushing Plug.

Any Tohatsu/Nissan/Mercury/Evinrude dealer.

Mar 30, 2024
pvanv replied to the thread ns50c timing specs.

If you didn't change them, they should still be correct. I don't know the numbers off hand, but I think that stuff is in your manual.

Mar 30, 2024
pvanv replied to the thread 70hp tohatsu running rough.

I vote for a proper carb cleaning.

Mar 30, 2024
pvanv reacted to racerone's post in the thread 70hp tohatsu running rough with Like.

Timing on modern motors does not go out of adjustment.-----Test run with boat in the water.-----Carburetors may need low speed mixture...

Mar 30, 2024
pvanv replied to the thread 2.5HP Mercury/Tohatsu/Nissan Outboard No Longer Starting.

There are 3 settings for the needle. Depends on where you install the clip. Also a screw to set idle.

Mar 15, 2024

Show older items

Home
Members

Top