muc's latest activity

Pretty sure that bolt hole shouldn't be open to the cooling water passage and a dealer would recommend replacing the entire module. If...

That's where I would go next. I think it's very important to answer this question. Try in neutral and see if you get a Neutral Overspeed...

I don't have the time right now to spend the time I need, hopefully tonight or tomorrow. I do have a couple of questions for @tpenfield...

Yes I have never seen this before. Maybe a EU thing? Engine build date 2016 sold in 2018. I'm not sure about it being a warranty return...

This wasn't the REC file I was hoping for. Here is what I see. Voltage still too low. this might explain the numbers I'm seeing and...

Thanks, non of these have been registered with Merc. Drive is listed as 1.62:1 ratio when it left the factory.

Thanks for sharing your experience on this thread - 100% Agreed on the prop pitch. Most folks think taxing the engine less by going...

Another thing. Do you have the HIN and serial numbers for the drive and transom? With those I might be able to see how this boat came...

Something else just popped into my head. I have very little experience with non OEM props. You have a non Mercury prop. I don’t sell...

I thought you said you dropped 2” in pitch? Generally speaking, a little boat like this, that should have a 19” prop will become a dog...

My money is still on. propping starting voltage fuel

My guess is that vacuum changing fuel pressure by about 10% isn't going to change GPH by 30%. Excessive fuel use is a symptom, not a...

Misfire counters show up in Diacom, but because this engine doesn't have a cam sensor and cats --- any info you see will be bogus. This...

For people following along, I would never advise a cylinder drop test be done by pulling spark plug cables on a EFI engine. Unless you...

A few things I should point out for future reference. @damo79 has a DTM engine not the DTS engines that @tpenfield has. A DTM engine has...