I purchased the CDI 40 amp 4 wire stator kit with the dual voltage regualtor to replace water cooled reg. Stator is 174-9610K2, dont have the kit part #. When I installed the kit I wired the stator incorrectly to the voltage regulator(like a dummy) and freid one of the regulators. So one reg...
Gentlemen,
How many RPM's should a 200 mercury turn? I'm no mechanic by no means but surely an outboard motor on a high performance boat will turn at lease 5500 easy. Here's the deal, I took my motor to a local "out of his house" mechanic because my motor at WOT would only turn 4000 RPM's...
I'm Back Gentlemen,
I have had problems with this lemon of a motor since I bought it. It was a 2.5L 200 mercury that someone rebuilt and put a 2.4 powerhead on and switched over to EFI. Here are my problems as well as the test and parts I have already put into this. First, the motor would...
Need some help figuring out the correct prop size for my motor. I have a 1991 19 ft norris craft FISH AND SKI that has a 200 merc on the back. It used to be carburated then was changed over to EFI. It currently has a 25p tempest plus but from what I have heard this prop is too big for the...
Gentlemen,
Can you tell me the results of a bad spark plug wire? I have the following readings on my spark plug wires which makes me think this might be the reason my motor wont run past 4000 RPM's. #1 3440 ohms #2 3350 ohms #3 3350 ohms #4 3350 ohms #5 3420 ohms #6 10 ohms.
I have a 1991 Norris craft that has a 1991 200hp EFI 2.5L merc on the back. I dont think it is running on all cylinders and am only getting 45mph. So the question is, how fast should this boat really go? From what I hear Norris craft's are meant to be fast similiar to a bullet bass boat...
Hello all,
I am needing some help getting my 1991 2.5 LITRE mercury 200hp running correctly. Took it out to the lake yesterday and only got the boat up to 45 mph. I knew the motor wasnt running right cause a norris craft with a 200hp should go at least 65mph. I will mention that I just...
Model- 1989 Johnson 100gt j100stlcem
Needing some help with my tilt and trim motor on my Johnson outboard. So here is the deal. One day I was tilting the motor up to put the lock down. i got the motor all the way up, put the lock down and hit the tilt and trim switch to go down and nothing...
Hopeing someone can help me out. For some reason when I turn the power switch on to the boat all the gauges come on and the livewell starts running. The switch to the livewell is turned off but continues to run. I disconnected the battery while the boat was not in use. Hooked it back up and...
Im new to this website and fairly new with working on boat motors so any help is greatly appreciated. I recently boat a stratos boat with 89 johnson motor. 100 hp model j100stlcem. The first problem I had but didnt know was the ignition switch. Not knowing that was the problem at first I...