Keith7481's latest activity

That's what I thought, similar to outdrive anodes

Thanks very much for that info. This is a four winns H260 I haven't put a tape measure on it, but I'll bet its maybe 10" from the side...

I only touched the manifold, didn't check the riser, in hindsight, I should have. No strainer.

Agreed, but it's very hard to get service, want to do what I can in my own, sensor is about it.

Thanks very much I'll see if I can reach him, much appreciated!

Wouldn't the previous lean code suggest plugs or sensor before plugged exhaust?

Looks like that hose is on the lower side of the engine, down by the plugs?

I dont have a scanner, was thinking about getting one. To remove the plugs id have to get inside the engine compartment. Im 6 1...

40869534

Closed cooling,,, idled for 5 minutes, I could touch it, but much hotter than starboard

Thanks, I was think about plug replacement, but that requires a visit to the shop. I thought since I can do the sensor first myself...

Earlier this summer my 2016 VP 350 with closed cooling was throwing a code for the port bank running lean. I had the code cleared and...