Recent content by FISHUNTR

  1. F

    Help finding replacement trim / tilt switch

    Spoke with Boats.net earlier and they could not tell me for sure which switch I need for my yamaha 704 binnacle (1997). Aparently there are no parts list for binnacles older than 2002. Does anyone know how I can find out or know what part # I need. Thanks in advance.
  2. F

    Engine wiring harness compatability

    My current motor is a 1997 Yamaha c115 TLRV. I (eventually) would like to test a fourstroke yamaha 115 on the boat as I am considering a repower. Looking at a friend of mines F115 the main harness looks to be the same however I did not unplug it to check the pins inside. There were some other...
  3. F

    Repair or plan on replacing motor?

    My 97 Yamaha 115 TLRV, is showing it's age and probably a little lack of maintenance / care from the previous owner. The steering bracket assembly is really starting to corrode especially where the steering arm bolt goes thru. I see the part alone is around 500 or so bucks and I don't think...
  4. F

    Rodbolt...followed your advice have Q on what I found

    This is in reference to an earlier post about a temp alarm: http://forums.iboats.com/showthread.php?t=407290 I ran the motor today and ended up with the temp alarm going off the 2 times if I ran it over 3500 rpm for a while. I pulled the water jacket covers to start the cleaning process and...
  5. F

    Yamaha warning horn goes off intermittently

    I have a 1996 yamaha c115 (no oil injection) and about 3 weeks ago while cruising the warning alarm went off. Checked the pee hole and it's putting out... so I shut down lift up motor to check the intakes just in case something had them partially blocked...nothing so I put it back down and turn...
  6. F

    Stuck impeller help

    Hello all, new here and need help. Thanks to all the great info I have gleaned from this site I am changing the water pump on my 97 Yam c115. Got everything apart ok (even the dreaded collar thanks an old post by Rodbolt) till it came time for the impeller which is stuck to the shaft. I've...
Top