Recent content by dreemon

  1. D

    low float level ?

    hi, have a 92 40 hp 2 carb mariner, runs great all the way to wot, but at idle it will 'chirp' at times and stall, pulled the carbs and cleaned well, carb cleaner, compressed air and wire through the jet stem holes, i held the carbs upside down, one float was level with carb body and the other...
  2. D

    low float level ?

    hi, have a 92 40 hp 2 carb mariner, runs great all the way to wot, but at idle it will 'chirp' at times and stall, pulled the carbs and cleaned well, carb cleaner, compressed air and wire through the jet stem holes, i held the carbs upside down, one float was level with carb body and the other...
  3. D

    Boyesen, air/fuel jets

    When adjusting for low speed idle circuits for after installing Boyesen reeds, does anyone know if you can just back out the idle mixture screw to richen the idle, or do you have to remove carb bowls and change the low speed jets/orifice to run idle more rich, thanks,
  4. D

    mariner low speed idle jet

    Gday, to all, I just bought boyesen reeds for my 91 40 hp 2cyl and the instuctions say to richen up the idle air jets/low speed fuel jets and idle mixture screws, now , i have 2 kiekhen carbs and would like to know if they have low speed air or low speed fuel, my manual says I have " low speed...
See more
Top