1996 Johnson 60hp I accidentally shorted the bottom screw on the terminal block mounted to the block [ 2 red wires]. Now it won't start, any ideas where to begin? I can't believe I didn't disconnect the battery, I hope it isn't an expensive lesson!
I have a 40hp mercury engine and am trying to find out the year, the serial number is 5484613. Also does it have a model number, I can only find the serial number plate?
Thanks!
I have a seat in my boat that is a 94qt ice chest. it sits in a frame that has a back rest that adjust so you can face in either direction. My problem is that the plastic pieces in the legs of the back rest that allow it to be pulled up to change positions are broke. Does anyone know where to...
I have a new boat to me, it is a Tracker 19' magna cc. I took it out for the first time yesterday and it only ran at 4700rpm's and 30mph after trimmed out. It has a 1975 johnson with a 13 1/4 x 17 prop. I need some advice on how to get the rpm's into the optimum range.
I have a 1975 115hp, when the engine is in the up position it will bleed down in about 15 minutes. Can someone give me an idea on where to start.
Thanks!
I bought a boat that had a blown 1992 115hp Johnson on it and I swapped it with a 1975 115hp Johnson until i can get a 4-stroke. With the help of this forum I am down to connecting the steering, thanks everyone! My current issue is the 1992 engine used a Seastar HC5340-42 steering cylinder that...
Do they make different length steering tubes? I had a 1992 johnson 115hp on my boat and am replacing it with a 1975 and it appears that there is not enough threads to hook up the hydraulic steering that is on the boat? I also cannot find the tube on the parts diagrams so if someone has a part...
I am switching from a 1992 Johnson 115hp to a 1975 115hp outboard. The 1992 has a spin on cannister fuel filter, will the 1975 have enough pressure to use this system or should I go to a small inline filter?
I looking to purchase a 1975 115hp motor this weekend. I am unfamiliar with the hydromechanical shift on these motors, is there any pointers on what to look for? Also, are the throttle and shift cables different from a 1975 and 1992?
I have a 1992 TJ115TLEND that has a bad bottom starboard cylinder. I am in the process of removing the power head but it appears that a ring broke and is wedged in one of the portsand there is only some slight scoring in the cylinder. The other cylinders look perfect. I just got this boat and...