Recent content by docyg2000

  1. D

    Transom fix

    This is a similar boat made by nitro. In this guys rebuild it just has flotation blocks from front to back.
  2. D

    Transom fix

    Well after a thorough inspection looks Ill need to do the transom. From my understanding this boat doesnt have stringers. If that is the case I will just use some seacast for the transom and call it a day. Its a 1990 Nitro 165 with a 90 hp motor. Your thoughts
  3. D

    Transom fix

    Here are a couple of more pics. Right now I want a temp fix. 😩 I know...
  4. D

    Transom fix

    It's a 90 tracke4 nitro with 90hp johnson.
  5. D

    Transom fix

    Well hello all, I junked the venture redo and got a 90 nitro 165, with 90hp johnson motor. After removing the transducer I found this mess. The wood is solid and not wet. How would you go about fixing it. Oh and do you think the hole in the second pick would be a problem. Thanks in advance
  6. D

    Double checking b4 i buy

    I bit the bullet and ordered it after watching a video that says teletext cables start with scc. It should be in Friday. I'll update you
  7. D

    Double checking b4 i buy

    Good day, this steering cable looks like it reads S6013413. However, when I google I find TELEFLEX SCC13414. For those of you familiar with teleflex is it the SSC I need. Don't 😃 😀 😄
  8. D

    A little help please

    Thank you
  9. D

    A little help please

    Hello all. I picked up 1990 nitro tracker with a 90hp johnson motor. The steering was stiff so I did the recommended options of isolation. I disconnected the thing, lol, and the motor turned fine by it self. Then I proceeded to remove the rod from the boat. Rookie mistake didn't guide it into...
  10. D

    Should I buy a new helm

    Working on a 88 venture and I have to get a new cable because its bent. After trying for 2 days to remove the steering wheel and helm with no success I'm wondering if I can keep this one. The teeth looks like their in good shape. Your thought
  11. D

    Buyers beware

    Ok, I did a dumb thing and did not look under the boat before purchase one because it was so cheap, 2 any, Got under it and saw the bottom of the hull was scraped up through gel coat and paint to the fiberglass. Yeah I know, but who does this. They used electric tape for rollers. Will this...
  12. D

    1988 venture

    Well hello again, I got my hands on a Venture bass boat with a 115 merc. I've pulled the carpet for the most part and began the cleaning process. Besides the floor and back area where the gas tank is, there is no glass. The carpet sat on top of the foam. Along the bilge its soft so my plan it's...
  13. D

    Old starcraft rebuild

    I picked up the boat a couple years ago and am just now getting finished with the rebuild. I removed all the old paint, and wood. Cleaned it primed with self etching primer and now ready for paint. I aslo had to rebuild an old trailer I bought.
  14. D

    Do I need a new axle and spring

    Cant get the pic to upload
  15. D

    aluminum stripping and paint?

    Hey guy, I back with got 14ft v hull. I've began stripping the paint used air plane stripper for top coat and sanded bottom with 100grit. I have a couple of questions. Besides the rivets in the pic is it ready to paint. Or should get all the paint. I don't plan on painting again so wanna do it...
See more
Top