FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
1) Performance issue you are trying to correct. Low RPM at WOT, it is currently running about 4400-4500 rpm
2) Current prop manufacturer, model, aluminum or stainless as a minimum. Solas rubex aluminum
3) Current prop diameter and pitch (required). 11" 15...
I have a Force motor with the serial # 0E022160. I would like to confirm what year it was made and I also would like to know what the proper Wide Open RPM is for this motor.
thanks
I am in the market for a new fishfinder. I only fish fresh water mostly 50 ft or shallower maybe once a year fish a lake where I might go as deep as 100ft.
My question is will a 2000w fish finder be high enough power for my application. Will it be able to tell the difference between fish and...
I have an old mercury outboard trolling motor a guy gave me and I am trying to figure out year and HP. I am pretty sure it is a 4 hp. It is a 1 cyl. I can't find a serial number anywhere on the outside. By the spark plug I found this number 1016-2394. On on side where the vacuum hose connects...
18ft aluminum 1973 starcraft, 1998 120hp Force motor WOT rating 4750 to 5250, I currently use a Stainless 18 p prop that is CUPPED. The motor currently runs at 4850 RPM at 32mph. The cavitaion plate on the motor is right at or just a hair below the bottom of the boat. I was thinking of trying an...
I have a 1973 18' starcraft aluminum boat and a 1998 120hp Force motor. I am currently getting 4800 rpm at WOT and about 31-32mph. I have a stainless 13.25 dia 18 pitch cupped prop. I was thinking of going to a 17 pitch prop and want to know if there is really any advantages in my application to...
