Hi
I have a 2000 90 hp johnson looper and the tach is reading 1000rpm at idle and when I rev the engine up the tach goes to 0 rpm. The reason why I installed the tach is because the engine rev limiter is kicking in and I do not believe it is turning 5500 rpm. I have a 6 pole tach and I just...
I have recently purchased a 90hp johnson loop charge and it runs hot. I removed the lower unit and flushed the engine with a hose from the tattel tale and comes out of the pipe that connects to the impeller housing and a smaller hole about 3 inches away I do not understand why the water is...
Hi
I have a 2000 johnson 90hp looper that is overheating it will get to about 175 shooting the head with a temp gun. So I removed the thermostats and the port side runs much cooler but the starboard side is still overheating what can I do and a large amount of water is flowing out between the...
Hi
I have a 2000 johnson 90hp looper that is overheating it will get to about 175 shooting the head with a temp gun. So I removed the thermostats and the port side runs much cooler but the starboard side is still overheating what can I do and a large amount of water is flowing out between the...
