I bought a 70's bubble manifold 135hp evinrude. With a bad stator (ran pretty good but low voltage from stator caused weak spark and wouldn't keep the battery charged) After a few months of trying to get the flywheel off and breaking multiple pullers I finally got it off. The bad news is I had a...
I have a evinrude 135hp. It has had multiple problems. I bought it as a running motor with no reverse. when i got it the flywheel was off.I had a fellow boater/friend help me get it back together. We got the flywheel on and had several sparking issues. Turned out to be a trigger problem.(very...
Hello....I have been working on outboards my whole life and I'm truely stumped. At first the motor had no spark. I unplugged the black/yellow wire with no luck. I hooked it back up. Checked the tach and about 300ish Rpms with plugs in. If I pull a plug and crank it that cylinder has spark. With...
I just bought a bass boat with a turn key 70hp evinrude. Motor runs and shifts great(By hand). The problem is the power pilot controls bind and it sticks in forward. I have taken it apart and put it back together several times shifting smoothly. As soon as i tighten it down it gets stuck in...
I have a 1987 70hp bigfoot mercury. I know it has been known for water intrusion. I had a backfiring issue and did a compression check the bottom 2 cylinders are 115 the top is 50. I thought it was about time for a rebuild. The thing that has been kicking my butt is I can't for the life of me...
