AusFox's latest activity

  • A
    AusFox posted the thread 350 MAG MPI Head Bolt spec in Mercury MerCruiser Sterndrives & Engines.
    Hi all, Has anyone got the 350 MAG MPI head bolt sequence and tensions?
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    UPDATE - Time to pull the heads off Well it seems the more I find damaged or out of spec and rectify it leads us to another issue...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Hi all, I got down to the boat on the weekend! The oil has been changed and the TPS reads 0.63V in neutral and smoothly increase to...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Hi Lpgc, Thanks for the detail!! When the engine locked up it was certainly fuel. When I take the MAP sensor out and the engine starts...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    When I was cranking and trying to use throttle it wouldn't start. Apparently before I got involved the only way they could get it to...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Yes mate that is the sensor I have and removed.
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    UPDATE So I have now done everything I can think of without the use of the scan tool as I still can't get hold of one! I used my PICO...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Thanks, I have found the crank position sensors brass threaded insert to be a bit loose so I have removed that and going to put some...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    What sprk plug's do you guys all reccomend for a 350 MAG Bravo 3? Currently running a NGK TR55IX (This is what was previously fitted)...
    • 1771882493443.png
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Thanks alldoge, The boat is an 80's caribbean and I understand the engine components to all be from around the 2008 time frame. I...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Hi guys, I have not been able to locate a serial number yet as I the engine has previously had the block and head's replaced and all...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    I have replaced the cap and rotor, when cylinder 1 is at TDC the tang is on the number 8 on the dissy housing and I believe that is the...
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Well my battle continues!! After sending the injectors away for a test and service and telling them that if they have any doubts about...
    • ING.jpeg
  • A
    AusFox replied to the thread Mercruiser 350 MAG MPI.
    Thanks for your help so far! We are in Australia and don't have anyone we can hire a scan tool off that will work with Mercruiser!! I...
    • 1768863299396.png
  • A
    AusFox posted the thread Mercruiser 350 MAG MPI in Mercury MerCruiser Sterndrives & Engines.
    Gday to all the brains trusts here, I have been assisting with a mates Mercury 350 MAG MPI that has had some running and hot starting...
Show older items
Top