alldodge's latest activity

Yes it can, but I'm guessing you want to know how, right? Need an alignment bar which are made for Volvo, Merc, OMC. Search Mercruiser...

Shift shaft should point straight forward not to port If the lower is in forward the prop will lock when prop is rotated counter clockwise

I said it the way I did so I didn't need to explain anything about how the dog clutch works

Asked Answered Answer

Definition normal please?? :confused:

The shift foot should be point forward on the upper half and should be held in position mated to the shift shaft on the bell housing...

I have a HH lift for some years now, and have adjusted them my self. At first it was adjusted to back in so it goes full down. To pull...

Gee, how about installing a powered jack plate. It can lift the motor high up for those shallow spots and lower it down for the high...

Welcome Shallow waters are killers for jet drives, most recommend at least 2 feet of water under the hull to keep from sucking up...

Welcome Agree with above Or look to see if chains are attached that keeps it from dropping all the way down. Another thing is if one of...

A little bit more like organized chaos then just stopping at the Quickfill, filling your tank and grabbing a sandwich. Just a snippet...

We were on the other side of LEROY GRUMMAN while she was fueling us and KEARSARGE during some NATO ops in 1995. Later that deployment...

Oh man that's just not right.

Probably, with enough land, a barn could be built . . . but I'm maxed out on what the house/land can do. There is a place right near...

Agree No seat belts, lights, etc and top speed of maybe 5-10 mph