Media

Navigation

Browse albums
I cut the plywood in half before recovering. Don't have to remove the whole bench now to get access to storage.

I cut the plywood in half before recovering. Don't have to remove the whole bench now to get access to storage.

  • 0
  • 0
Lots of wasted space in the bow of a 2755. Got tired of setting up the v-berth and taking down to use as dinette. And then having to store the extra c

Lots of wasted space in the bow of a 2755. Got tired of setting up the v-berth and taking down to use as dinette. And then having to store the extra c

  • 0
  • 0
Using finnished 1x3 to frame the support.

Using finnished 1x3 to frame the support.

  • 0
  • 0
I removed all the carpet and fitted a 3/4" plywood to extend the platform to the edge of the seat base. This also provide extra storage.

I removed all the carpet and fitted a 3/4" plywood to extend the platform to the edge of the seat base. This also provide extra storage.

  • 0
  • 0
Added supports on each side that sits directly over the super structure so that there is access to storage below.

Added supports on each side that sits directly over the super structure so that there is access to storage below.

  • 0
  • 0
Port side support for V-berth.

Port side support for V-berth.

  • 0
  • 0
V-berth, purchased a 3" memory foam from Wallmart.

V-berth, purchased a 3" memory foam from Wallmart.

  • 0
  • 0
V-berth Trim installed, glue with SS screws and foam cut. The foam takes several days to expand to full size after pulling it out of the small box it

V-berth Trim installed, glue with SS screws and foam cut. The foam takes several days to expand to full size after pulling it out of the small box it

  • 0
  • 0
V-berth Trim with 1 coat of clear coat. I used 1/4" finnished plywood for the boxes and closed in the port side box, leaving the center and stb side o

V-berth Trim with 1 coat of clear coat. I used 1/4" finnished plywood for the boxes and closed in the port side box, leaving the center and stb side o

  • 0
  • 0
New V-berth completed. Table was also cut down to allow better access to seating.

New V-berth completed. Table was also cut down to allow better access to seating.

  • 0
  • 0
Re-powered OMC 5.8L in 2007 with a holley double pumper.

Re-powered OMC 5.8L in 2007 with a holley double pumper.

  • 0
  • 0
Map pouch.

Map pouch.

  • 0
  • 0
Finished look.

Finished look.

  • 0
  • 0
Removed stove cover and bolted to counter. Haven't desided what to do for trim, so just used tape.

Removed stove cover and bolted to counter. Haven't desided what to do for trim, so just used tape.

  • 0
  • 0
Stove was never used and I could never bring myself to lighting a fire inside the cabin using the alcohal burners. Removed the stove and capped the hy

Stove was never used and I could never bring myself to lighting a fire inside the cabin using the alcohal burners. Removed the stove and capped the hy

  • 0
  • 0
Installed white LED's around the entire cabin above the bumper. The cave.

Installed white LED's around the entire cabin above the bumper. The cave.

  • 0
  • 0
Installed white LED's around the entire cabin above the bumper. Forward cabin & V-berth

Installed white LED's around the entire cabin above the bumper. Forward cabin & V-berth

  • 0
  • 0
Replaced all cockpit lights with yellow outdoor LED's. Much easier on the eyes at night and doesn't attract bugs.

Replaced all cockpit lights with yellow outdoor LED's. Much easier on the eyes at night and doesn't attract bugs.

  • 0
  • 0
Picture 142

Picture 142

  • 0
  • 0
DSCF1636 [800x600]

DSCF1636 [800x600]

  • 0
  • 0
Boat 0040

Boat 0040

  • 0
  • 0
302

302

  • 0
  • 0
boat 005

boat 005

  • 0
  • 0
boat 002

boat 002

  • 0
  • 0
Top