62 Johnson Seahorse water inlet/flush location?

Vanman62

Cadet
Thread starter
Joined
Jul 13, 2018
Messages
8
Hi there,

Does anyone know where and how you flush a Johnson Seahorse 40hp RK-25D? The only information I can find seems to be using those earmuffs which I don't think will work with my engine. The engines been sitting for over a decade so I would like to flush it out before testing it properly.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Can be made to work, but better to change out the impeller and hose out the leg. Then run it at idle in a barrel (water a few inches above the pump.) Get a plastic trashcan and fill it up -- keep the hose running.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Water intake is in the leading edge of the exhaust snout aft of the prop. Muffs won't work on it. Flushing attachments haven't been made for many years
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
If determined to do it, can take off the plate and screen on the starboard side of the l.u., just above the anti-ventilation plate. Cut down/square off the muffs, and attach with the hose outlet side over the inlet, and run it that way.
 
Last edited:

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
That plate is quite large on a RK (electric shift). If you really, really want to do it, fabricate a copy of the plate and install a hose fitting into it. For on-land test only. Do not attempt to run it in the lake that way.
 

Vanman62

Cadet
Thread starter
Joined
Jul 13, 2018
Messages
8
Can be made to work, but better to change out the impeller and hose out the leg. Then run it at idle in a barrel (water a few inches above the pump.) Get a plastic trashcan and fill it up -- keep the hose running.

Think that's what I'm going to go with. My fabrication stuff is away at my shop so I'm not too interested in trying to rig something up. Besides the impeller is probably junked by now anyways.

Thank you.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Better choice all around while trying to get it up and running. The auto choke on your motor is interesting (also have a manual override). It gives you an excuse to make sure there is a working t.stat, so might want to handle that with the water pump work.

Hope you post progress.
 
Top