What kind of engine is that?

Dobermann79

Recruit
Thread starter
Joined
Jul 26, 2017
Messages
4

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
It's obviously some sort of old Evinrude/Johnson design... BUT... one that I've never seen before. There's usually a small plate attached to the port transom bracket with the model & serial number... OR... a bigger plate just above the center area where the engine would sit upon the transom with those same numbers... OR... a quarter size core plug (looks like a small freeze out plug) somewhere on the powerhead that contains those numbers. If so, what is the model number? We probably don't have any info on it via the number but we would like to see it regardless. The model number could most likely ID the motor by calling the factory. Could be that Bombardier would like to get their hands on that engine..... $$$$$ :) .
 

175se

Petty Officer 1st Class
Joined
Mar 6, 2014
Messages
274
Im not sure, but to me it looks like it has a 2 line tank, if that is true maybe a late 50s. Mr Reeves is right on the looks & stuff.
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Im not sure, but to me it looks like it has a 2 line tank, if that is true maybe a late 50s. Mr Reeves is right on the looks & stuff.

Yes... that is a two line pressure tank. The design of the engine's carburetor, and appearance from the powerhead down hints at the year of 1956/57.
 

Dobermann79

Recruit
Thread starter
Joined
Jul 26, 2017
Messages
4
We found a Number......

??256-237-808??

There is no Other ID in on the motor🤔
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
There is a guy on this forum that may know, I just cant remember his screen name. His signature has a link to the classics that he rebuilds. There is also that old motor group AOMCI or something like that. A post to them might help
 

clemsonfor

Lieutenant Junior Grade
Joined
Sep 19, 2005
Messages
1,011
Yea I think I have seen the guys posts your talking about. Don't remember a name either
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Looking closer, it appears the powerhead is 1959 style - there's provision for a thermostat in the block, but uses the 1957-1958 cylinder head without a stat.
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,699
Looks like one of those engines the navy would drop in the water, to be retrieved, drained and used
 

geoffwga1

Petty Officer 1st Class
Joined
Aug 8, 2010
Messages
398
Looks like one of those engines the navy would drop in the water, to be retrieved, drained and used

I agree Jimmbo.The interfaces between the cowl and the pan are machined by the look of it so it is sealable also the little hatch over the carb.I think it may be some exotic made for special forces or something like that . I would think BRP would be able to shed some light. Wonder what the pull ring thingies under the pan are for.
 

Dobermann79

Recruit
Thread starter
Joined
Jul 26, 2017
Messages
4
We also think that he was built for the military. He looks like new without a trace of a use. We have been looking for pictures for hours on the Internet but nothing found! What do you think what he could be worth ??????


I look times if I get the weekend to do then I make pictures of the engine again. If we could solve the puzzle .....
 
Top