1971 50 hp exhaust housing removal

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
I have a 1971 50 hp with the lower unit removed. I am trying now to remove the exhaust housing to replace it. The bolts holding on the lower unit rusted into the exhaust housing and it is also cracked. I bought a new one to replace it since i though i could remove the bolts holding it in place per the schematics and pull it down but it is not budging. Am i missing something or do i need to remove the pwerhead/motor? i am trying to post a pic. thanks for your help.
 

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
here is a pic of what i am referring to. i can try to post the schematics as well if it would help.
 

Attachments

  • exhaust hsouing.jpg
    exhaust hsouing.jpg
    63.9 KB · Views: 3

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Yes, you have to remove the powerhead. And more.

EDIT: I think I see what you are thinking. You are thinking you can leave the powerhead and powerhead adapter hanging from the upper mount, right? Interesting. I must say I've never tried that. Hey, you almost have the powerhead ready to come off anyway.
 
Last edited:

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
thank you for the reply. i wasnt sure. i am not sure i want to take the whole thing apart. this is my first motor and it does run. i wanted to replace the exhaust housing because one of the 5 bolts that holds on the lower unit is broken and still in the exhaust housing. my question is could i attach the lower unit and just leave the broken bolt there and seal with a gasket sealer? or do i absolutely have to have all the bolts to hold on the lower unit. pic coming...

in response to your edit F_R: yes i thought i could just pull down the exhaust housing and leave everything else where it is. there is a gasket between exhaust housing and adapter. i have removed all the nuts holding on the exhaust housing (confirmed this by looking at new exhaust housing) so i dont know why it wont come off. maybe the bolts are rusted in...i took off the nuts. maybe the gasket it sealed. i just wanted to know before i start hammering trying to get it off.
 
Last edited:

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
here is a pic of the bottom of the exhaust housing with the broken bolt still in there...
 

Attachments

  • broken_bolt.jpg
    broken_bolt.jpg
    57.6 KB · Views: 1
Last edited:

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Hurry and find a machine shop to remove the broken bolt.---Far cheaper that removing the exhaust housing and replacing that.---Have you priced / found a replacement housing ??
 

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
yes i have the new exhaust housing already. found one for $40 so i grabbed it. I tried to grind off the bolt and messed up and took a chunk out of the aluminum exhaust housing. thats why when i saw the part i just grabbed a new one.
 

lmuss53

Lieutenant Junior Grade
Joined
Sep 9, 2008
Messages
1,227
Someone who welds a lot can lay a nut on the broken bolt, wire weld down through the nut to the top of the bolt, attaching the nut to the broken bolt. They usually spin right out then having been heated up by the weld. you may have to paint the housing then. I had a 1976 with three of them broken off and removed in this manner.

I don't do them, but I have seen them done this way at work. The welder says the trick is to build the bolt back up inside the nut and then join it all together. Let it cool a little and the broken bolt should back out.
 

Watermann

Starmada Splash of the Year 2014
Joined
Jan 12, 2013
Messages
13,860
Have you removed the retainer ring from the bottom of the swivel shaft at the front of the housings lower mount?

You don't have to pull the head to do this just new gaskets and a water tube grommet.
 

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
no i did not remove that retainer ring. so if i remove that i could remove the exhaust housing by just pulling it down?
 

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
yes i will keep posting. i already took off the carb, starter, generator, fuel lines,and air intake. I have the service manual and it said i have to also take off the fly wheel and stator to remove the powerhead. i dont have a tool for that so i stopped. i cant find anywhere in the 400+ page service manual that mentions the exhaust housing which seems odd.

i am going to try removing the retainer ring as suggested...
 

Watermann

Starmada Splash of the Year 2014
Joined
Jan 12, 2013
Messages
13,860
iboats won't let you post websites in the forum of competing part retailers. Look up and remove that ring and it will drop right off since you have all the bolts out. you'll have to do that anyway to remove the PH even after going through all of what you've done.
 

1971Evinrude50hp

Cadet
Thread starter
Joined
Dec 21, 2016
Messages
16
yeah i removed it and i just think the gaskets are really stuck or something. it wont budge, i dont want to hit it any harder. i guess ill get the flywheel tool and keep going with taking it apart.
 

Watermann

Starmada Splash of the Year 2014
Joined
Jan 12, 2013
Messages
13,860
There's nothing but the bolts and that retainer ring holding the mid housing on. I took mine off earlier this year so ripping the top end off will be futile.
 

Watermann

Starmada Splash of the Year 2014
Joined
Jan 12, 2013
Messages
13,860
Yeah that's it. There is a difference though that diagram looks to be a different motor than the older 70's.
259827_14_0.gif
 
Top