searider The engine is like your picture number two. I have checked it. It seems to be a decent height at least.
This is screenshotet from a video I had, so excuse the poor quality.
I can take a better picture from behind once I get the opportunity to test the boat again.
Again, thank you all for your help!
"On any "V" hull with no pad, lower eng. to level, boat on trailer. Lay a 2x4 or straight edge of some sort on bottom at keel, trim av plate to parallel. With it there, measure back from bottom point at keel to front of/L.E. of gearcase,
for every 7" back you want av plate 1/2" higher. so if it's 16" back, av plate should be close to 1" above boat bottom."
My boat got some sort of keel in the front, but stops. (see picture in link, it is only google drive, no need for download or etc.)
With no pad? Can you explain a bit further to me? I understand everything until the marked area. Do you mean inches, or cm?
Link for google drive photo album: https://photos.google.com/share/AF1...?key=LXhrWlJHelFSNnZzRFQzZ3g0NUxVV0xfVHRzVmdB
Thank you all again! Sorry for any inconveniences I might have started due to my lack of English understanding.