nwcove
Admiral
- Joined
- May 16, 2011
- Messages
- 6,293
Re: Installing new Ignition Components
if they are gapped to 020 and clean, the motor should run ok. to use the timing marks you either need a timing fixture and a multi meter, or just a muti meter and some small alligator clips to connect it to the points and to a good ground on the motor.
if they are gapped to 020 and clean, the motor should run ok. to use the timing marks you either need a timing fixture and a multi meter, or just a muti meter and some small alligator clips to connect it to the points and to a good ground on the motor.