- Joined
- Mar 8, 2009
- Messages
- 40,819
Took a ride to see Eddie today to give him the new elbows. The engine looks real good and will be on the dyno next week. Eddie and Travis have done some real nice work. Opened up the fuel rail and will feed fuel from both ends and has a return line back to the tank. Cut down the intake and opened it up some.
In this pic you can see what the intake use to look like and that mine has been cut down so it is level with the inside of the plenum. Also charged from V-belt to serpentine
PS cooler mounted on the rear deck, cool fuel mounted were cooler was, port side low
Now I really need to get moving to finish the transom and other glass work
In this pic you can see what the intake use to look like and that mine has been cut down so it is level with the inside of the plenum. Also charged from V-belt to serpentine
PS cooler mounted on the rear deck, cool fuel mounted were cooler was, port side low
Now I really need to get moving to finish the transom and other glass work
Last edited: