Search results

  1. S

    Mercruiser 4.3 MPI shift cable adjustment.

    Hello all, Not long ago, I decided to adjust my shift cable when I was having issues I thought it might be causing. It turns out it was not causing the problems I was having. Now, after adjustment to factory settings, it won't go into neutral without playing with it a bit. I have to slightly...
  2. S

    Installing ski plyon/waketower on Tahoe 215 deckboat

    Hello all, so I'm trying to figure out a way to install a sky pylon on the back of my 2008 Tahoe 215. The problem is you can't really access the underside of the bolts to get nuts on the mounting hardware. Is there any way around this and still have the similar amount of strength? I know these...
  3. S

    Making custom ski hook/pylon on Tahoe deck boat need some input.

    So I have a 21.5 foot 215 Tahoe and I'm wanting to make a custom ski hook/pylon rather than the current one is which looks like this: http://media.channelblade.com/boat_g...80_image15.jpg Problem I have with the current hook is the ropes tend to drag the water a bit. I used sky pylons before...
  4. S

    Nauticus smart tabs on 2006 Tahoe 215 deckboat 4.3 MPI installation questions

    Model I have: Nauticus SX10512-90. I've called Nauticus and got some recommendations from them, but just wanted to post a thread about it as well and see what folks think as I got the impression he wasn't too certain about the install or how well it will work for me (said I may need to go to...
  5. S

    Orca Perfromance fin anyone out there try it before?

    Anyone got experience with the orca performance fin on I/O mercruiser or a deckboat? They make the bold claim of being better than trim tabs, but my concern is wouldn't it put stress on the trim/gimbel like most hydrofoils? I wonder if there is any true evidence of this added stress claim...
  6. S

    Spark plugs for 2006 mercruiser MPI 4.3 engine 215 tahoe deckboat.

    Just wondering what would be the best option here, and what gap do I need. I got a 215 Tahoe deckboat and it's really cramped in there, any tool suggestions or should I be able to get them out with a standard swivel spark plug socket? I remember the last time I did them on a old 5.0L volvo...
  7. S

    2006 Tahoe 215 deckboat 4.3 MPI alpha one gen 2 prop question

    Hey guys so my current prop on this boat is a 48832832a45 14-1/4 x 21p normal rotation. three blade I'm looking to upgrade to a 4 blade prop and wondering which pitch would be best to go with. The current prop is maxing out a little bit over 4k RPMS and getting a top speed in the high 30's. I...
  8. S

    Water pump replacement gone south Alpha one Gen 2

    Hey guys so replaced the water pump on my alpha one gen 2, and now when putting my boat in forward or reverse it seems more difficult. Also in forward it's making a loud clicking noise. I suspect something isn't seated correctly as I only took the foot off. When you guys service these do you...
  9. S

    2006 mercruiser alpha 1 gen 2 with MPI v6 winterizing questions Tahoe deckboat

    So I got a couple questions on the winterizing of this setup. With the MPI engine do you still spray fogger under the flame arrestor? Also any suggestions for putting in new plugs with the Tahoe 215 space seems very limited any useful tools that may help? As for antifreezing the lower unit I...
  10. S

    2007 4.3 MPI mercruiser starting issues / fuel issues

    Hey guys so I'm having issues with my 4.3 mercruiser starting, and running smooth when adjusted into low RPM. Once you do get it started it will run fine at high RPMs, but if you go down on the throttle it will turn the engine off. I know there was some old gas in it I ran on so I replaced the...
  11. S

    Vovlvo penta 1995 DP-C1 3102161726 gear oil

    HI all I was wondering if 80w - 90 gear lube would work ok with this unit. Pennzoil. Most of what I see 75w 90, but doesn't seem like a big difference. Thanks!
  12. S

    95 vovlo penta ford 302 questions

    Hi guys so I'm wondering what oil I need to use in this engine will and marine 4 stroke oil should do fine? Was thinking 10w 30 would be alright 4 stroke, but it says outboard so not sure if it can be used in a inboard. Also I can't find the engine number anywhere it seems to have been faded...
  13. S

    Removing oil drain screw from Volvo outdrive.

    Hi guys from what I hear these screws tend to seize up, but mine is really bad. I can't even get it out with impact screw driver manual and a electric one. I'm not sure if I really should be heating it up or not. Could I drill it out? Sounds risky too :-) I expect this gear oil hasn't been done...
  14. S

    Need help identifing motor and out drive by pictures.

    I know the out drive is a vovlo penta, but not exactly sure what model if anyone can tell by picture. He claims these are original to the boat, but I have my doubts since most these boats had the mercruiser motor and out drive. I've also attached a picture of the motor which he says is a 1995...
  15. S

    1988 225hp Evinrude water pump replacement

    HI all I got a few questions on this motor regarding replacing the pump. Model: E22TX 225hp I need to know the torque settings for the pump housing and the torque settings for bolts mounting the foot back on. I also am confused with the o-rings. The kit came with 4, 1 thin long one, 1 thin...
  16. S

    Using BEHR Premium DeckOver on deck boat?

    So I assume this would work find for a deck boat with wood flooring, but anyone ever try it with Aluminium flooring? Figured this would be easier, and quicker than putting in new carpet. Any ideas how well this stuff would work?
  17. S

    Wanting to know if motor is big enough for 22ft Aluminum deckboat

    So I currently have an old 225hp Evinrude 2 stroke on my 1994 22 foot v hull aluminum lowe deck boat. I don't know the exact weight, but it's 22ft by almost 8 foot wide in the center. I was thinking about getting a 2003 Suzuki DF140 four stroke for better gas milage & no mixing. My question is...
  18. S

    1988 Evinrude E225TX 225hp compression issues.

    Hi all I got this engine on a 22 ft deck boat and I noticed some issues when out on the water it seems to be sputtering at full throttle (ran fine a majority of the time till we got ready to leave) kinda like it's losing power. I notice the water pump isn't spraying very hard. Good amount of...
  19. S

    Yamaha 1993 C85TLRR 85HP Prop Questions.

    Hi all I'm trying to find the best prop for this motor based on how I use the boat (tubing & skiing) I want to get the most possible torque without taking a huge hit on speed. Currently I have k type 21" prop and it will get the boat up to around 32-38 mph top end depending on how many people...
  20. S

    Yamaha 1993 C85TLRR Carb rebuild question: Float height.

    Hi all so I'm rebuilding the carbs and I trying to figure out the service manuals recommend float height. I assume it means 19.5mm, but that's too high to be possible. I've attached an image can someone explain to me how to read these measurements correctly? Currently the carbs leak when lifted...
Top