Yamaha gas guage problem

[Gep]

I have a 1992 Yamaha 130hp TXRQ engine,<br />a 62 gallon Rayco Manufacturing gas tank, and a LCD Marine meter.<br /><br />I cannot figure how to hook back up the gas guage after I had to take the console off and take the wiring apart.<br /><br />I have a pink wire with a male bullet connector, and a black wire with a female bullet connector coming off of the gas tank.<br /><br />Here's what I have left as far as wiring to hook into to on the LCD marine meter:<br /><br />1-black wire with female bullet connector,<br />1-blue wire with female bullet connector<br />These are bundled together by themselves.<br /><br />I also have:<br />1-white wire with female bullet connector,<br />1-white wire with a blue stripe with a female bullet connector.<br />These are what are left from the other bundle of wires.<br /><br />I am totally confused! Can anybody help?<br />Thanks,<br />Mike

 

[JB]

Re: Yamaha gas guage problem

Ahoy, Mike.<br /><br />I jumped to my bookcase to check the yammymanual, then realized I gave it to you with the boat/engine. That is the only place I would think to look.<br /><br />Good luck.

 

[Gep]

Re: Yamaha gas guage problem

Hi JB,<br />I've scoured the book.<br />The wiring schematics page is so small that I had to make a copy of it and enlarge it by two hundred percent and even still it's hard to read with out a magnifying glass or a loop.<br />It shows how to wire everything except the Marine meter. It only shows the tach.<br />I already have that working.<br /><br />I think I have some wires that I already hooked up that are wrong, so I'm probably not only dealing with the wires I have left but probably some others also.<br />I just this weekend figured out how to hook back up the volt meter and hour timer.<br /><br />One of these days I'll send you some photos of the restoration.<br />Mike