What is the best method of putting a motor in winter storage? I have a 2000 Yamaha 50 H.P. motor. I am getting conflicting advice as to the best mentod to treat the carbs. One approach is to run stabil. Another says Seafoam is a better treatment. Some say to then run the gas out of the line and drain the carb port screws. Other say the carb should be stored "wet" so don't drain them. If they are dry they will leave a scale of some sort. Any clarifications between stabil and seafoam and or<br />draining or not to drain would be greatly appreciated.<br />Thanks for the help.<br />Makky
