YAMAHA 3.0L Electronic Ignition

bodydroppedtaco

Recruit
Joined
May 1, 2007
Messages
1
I just took out a 2.5L Mercruiser w/o a electronic ignition and replaced it with a Yamaha 3.0L with an electronic ingition.....engine cranks but there is no fire on the distributor......there is a small plug mounted on the master plug.....i traced those wires back and they tie into the ingition system....so i guess my question is what plugs into it to make the igniton system work
 

Capt Ken

Commander
Joined
Jul 30, 2002
Messages
2,270
Re: YAMAHA 3.0L Electronic Ignition

Check the purple wire on the coil and see if you have twelve volts with the key on. Also you will need to use the shift switch for yamaha since it uses power to break the ignition for shifting, not ground.
 

whywhyzed

Banned
Joined
Feb 1, 2005
Messages
1,871
Re: YAMAHA 3.0L Electronic Ignition

or just grab the dist. out of the 2.5 and put it in the 3.0
 
Top