touch107fm
Cadet
- Joined
- Sep 15, 2011
- Messages
- 23
Hi Guys
Need your assistance, I have a old half cabin which I bought and the wiring has being pulled out for the trim motor.
I have uploaded a simple drawing of what I have or what was in there before.
The motor is a old evinrude 70hp with the trim unit with 3 cores/wires.
What was in before was not connected to the key which is fine.
I have:
1 x solenoid (4 ports)
1 x trim motor (3 wire)
1 x trim switch (3 wire)
1 battery
Can anyone help and tell me how I should be connecting all these together.
Many thanks
DarraghView attachment 165101
Need your assistance, I have a old half cabin which I bought and the wiring has being pulled out for the trim motor.
I have uploaded a simple drawing of what I have or what was in there before.
The motor is a old evinrude 70hp with the trim unit with 3 cores/wires.
What was in before was not connected to the key which is fine.
I have:
1 x solenoid (4 ports)
1 x trim motor (3 wire)
1 x trim switch (3 wire)
1 battery
Can anyone help and tell me how I should be connecting all these together.
Many thanks
DarraghView attachment 165101