Where to Find Kohler 5E Generator Motor Mount / Fuel Pump bracket

mckaras

Petty Officer 3rd Class
Joined
Apr 21, 2020
Messages
83
This bracket is welded on, Kohler apparently has never had a replacement for it.

I’m looking for a suggestion as far as where I can get one as mine is essentially rusted out in between where it was parallel to the generator pan.

I haven’t been able to find any pictures or places selling one so far. There’s a kohler part that shows engine mount bracket but no pictures or diagrams of it.
 

Attachments

  • image0.jpeg
    image0.jpeg
    321.4 KB · Views: 13

mr 88

Commander
Joined
Nov 3, 2010
Messages
2,179
I would mount it somewhere else . All you have are two wires and a fuel line , not hard to extend any of those items to a new mounting location.
 

FunInDuhSun

Chief Petty Officer
Joined
Apr 25, 2010
Messages
473
I have a 5e sitting in my shed, but it’s buried under a LOT of other gear.
I was able to snap this picture.
I know it’s not exactly what you need but maybe you can use the measuring tape and scale it.
 

Attachments

  • IMG_2011.jpeg
    IMG_2011.jpeg
    3.3 MB · Views: 11

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,554
that mount should be welded to the case on the alternator itself.

for that to be rusted, you most likely also have alternator issues. I would pull the genny to work on it.
 

mckaras

Petty Officer 3rd Class
Joined
Apr 21, 2020
Messages
83
I have a 5e sitting in my shed, but it’s buried under a LOT of other gear.
I was able to snap this picture.
I know it’s not exactly what you need but maybe you can use the measuring tape and scale it.
It’s a different bracket on yours, mine is welded to the generator and that is where the engine mounts screw to.
 

mckaras

Petty Officer 3rd Class
Joined
Apr 21, 2020
Messages
83
that mount should be welded to the case on the alternator itself.

for that to be rusted, you most likely also have alternator issues. I would pull the genny to work on it.
Generator is pulled already, really the worst worst was that bracket being disintegrated and the drip pan as well. The rest of the boat was in solid condition. The engine hardly had any rust. These pans are known for rusting. I have had 6/7 Boats with them. Only one purely freshwater boat had minimal rust on it, the rest of them needed complete drip pan replacements.
 

Kosmofreeze

Seaman Apprentice
Joined
Aug 23, 2023
Messages
38
Check eBay - lots of 5E units from "runs perfectly" to "parts only" to be found there.
 
Top