water pump

tired evinrude

Seaman Apprentice
Joined
May 10, 2009
Messages
40
Hey guys been a while. Got 9.5 rude around 72model.How hard is it to put a water pump in it. thanks
 

mettyfish

Petty Officer 2nd Class
Joined
Jul 3, 2007
Messages
180
Re: water pump

Just did one a couple months ago. Not hard at all. Just unscrew 4 bolts under plate. Pull a little while putting gear into reverse. Unscrew shift linkage pull on out.





Hey guys been a while. Got 9.5 rude around 72model.How hard is it to put a water pump in it. thanks
 

matt88

Petty Officer 2nd Class
Joined
Mar 17, 2009
Messages
160
Re: water pump

not a bad job,just make sure you put the impeller vanes in the right direction and disconnect the shift linkage at the lower unit and not under the carb(if your motor is like my 1975 9.9 johnson). Only other tip I can think of is to pay close attention to make sure everything connects (rubber grommets)when you put everything back together.
 
Top