My 1979 SeaRay 268 was moored for 3 years with very little use. I raised the outdrive full up to change the prop and ran the engine for several minutes, a few days later I noticed about 4" of water in the bilge. Pumped the water out and dried the bilge, started the engine and noticed water trickling from somewhere around the outdrive, but impossible to see exactly where it was coming from. Shut engine off and the water seemed to stop, boat is now in my driveway.
I'm looking for any suggestions someone may have before I start tearing things apart.
I'm looking for any suggestions someone may have before I start tearing things apart.