Volvo Penta D3-200 Turbo

cfarrugia

Recruit
Joined
Aug 27, 2023
Messages
1
Hi, I am trying to remove the turbo on my VP D3-200 engine. I managed to remove all bolts except one which is hard to reach. This is the one securing the turbo to the exhaust manifold. It's basically impossible to reach due to its location. Appreciate some advice. thanks
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,891
Welcome
Have not worked on the 200, but like all marine stuff ya just need to figure out what needs to be removed to get at what you want to take off,

Sometimes you need to make a tool. Example: There was one bolt I could just barely get at on starter for a D3 dozer. Bent a boxed end just enough to get at it and could only turn one 12 point notch at a time. Other cases had to remove the entire exhaust manifold to gain access to the injector

Post a few pics, maybe we can come up with something
 
Top