Hey guys,
I need some help here. I have access to the Rinda Diacom software for further information.
Have a 2000 Four Winns 210 Horizon with a Volvo Penta 5.7L GSi PEFS and SX-M sterndrive with 410 hours on it. This has the MEFI-3 ECM.
The problem I have is that it surges and stalls at idle. It runs great everywhere off of idle. I have changed the IAC, the coolant temp sensor, the fuel filter/water separator and the thermostat with no change. I have the Diacom software but not much knowledge in using it. Are there base values I can compare my data with somewhere? I have recorded live data of the engine at idle.
I also noticed that one of the injectors is visibly spraying more fuel than the other at idle. Is that normal? I have run two tanks of fuel through the boat since I've owned it, with injector cleaner in both tanks.
I'm willing to get the info anyone may need to help me diagnose my issue. Would really appreciate some help/insight.
I need some help here. I have access to the Rinda Diacom software for further information.
Have a 2000 Four Winns 210 Horizon with a Volvo Penta 5.7L GSi PEFS and SX-M sterndrive with 410 hours on it. This has the MEFI-3 ECM.
The problem I have is that it surges and stalls at idle. It runs great everywhere off of idle. I have changed the IAC, the coolant temp sensor, the fuel filter/water separator and the thermostat with no change. I have the Diacom software but not much knowledge in using it. Are there base values I can compare my data with somewhere? I have recorded live data of the engine at idle.
I also noticed that one of the injectors is visibly spraying more fuel than the other at idle. Is that normal? I have run two tanks of fuel through the boat since I've owned it, with injector cleaner in both tanks.
I'm willing to get the info anyone may need to help me diagnose my issue. Would really appreciate some help/insight.