Volvo penta 3.0gl starter problems

soda507

Recruit
Joined
Jul 16, 2007
Messages
3
I have a 94 Volvo Penta 3.0 GL which the starter is giving me some grief, I had to tap on the solenoid to get it to start so I opened up the solenoid and cleaned up the contacts but still have a problem. I noticed that the lever going to the starter from the solenoid is a bit corroded. Does anyone know if it is ok to spray WD 40 on it to hopefully loosen it up or have any other ideas?
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: Volvo penta 3.0gl starter problems

Take the starter to a starter repair shop and have it gone thru. There is probably rust and corrosion inside the starter. How deep has the water been in the bilge?
 

soda507

Recruit
Joined
Jul 16, 2007
Messages
3
Re: Volvo penta 3.0gl starter problems

I have only had the boat for a couple of weeks and there has never been more than a drip or two however I do not know about prior to me. Do you know if it is ok to spray the conector off of the selenoid to the starter with WD 40?
 
Top