volvo 270-u-joint stuck.......patience.....fading.

Kevin70

Petty Officer 1st Class
Joined
May 24, 2006
Messages
342
can someone please tell me what i'm missing. I have taken out the upper gear box, turned it to its side, fliped it, beat it, snatched it, and I can not get the u-joints to break loose from the motor. WHAT AM I MISSING??? I am removing the motor and I have to take off u-joint and bellows to get to the mounting plate.
 

510man

Cadet
Joined
Jan 7, 2006
Messages
19
Re: volvo 270-u-joint stuck.......patience.....fading.

I have this exact boat. Rot isn't nearly as bad. Keep me posted on your progress. I'll be doing some of the same work.
 

Kevin70

Petty Officer 1st Class
Joined
May 24, 2006
Messages
342
Re: volvo 270-u-joint stuck.......patience.....fading.

I forgot to mention that this is a volvo penta AQ125A. The one with no motor mounts.
 

Kevin70

Petty Officer 1st Class
Joined
May 24, 2006
Messages
342
Re: volvo 270-u-joint stuck.......patience.....fading.

^bump
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: volvo 270-u-joint stuck.......patience.....fading.

The problem is caused by rust from water in the bellows and total lack of maintenence.<br />In the past I have pulled them off with a chain (NEVER use a rope) hooked to the forklift. When that doesn't work, the Oxy/Act cutting tourch comes in handy.
 

KRS

Banned
Joined
May 15, 2004
Messages
2,383
Re: volvo 270-u-joint stuck.......patience.....fading.

:eek:
 

bigbrownbuku

Master Chief Petty Officer
Joined
Sep 17, 2004
Messages
885
Re: volvo 270-u-joint stuck.......patience.....fading.

the shaft is seized and don mentioned the only solutions. the shaft and crosses are still available.
 

rodbolt

Supreme Mariner
Joined
Sep 1, 2003
Messages
20,066
Re: volvo 270-u-joint stuck.......patience.....fading.

yep<br /> aint saltwater great, 50 cents worth of grease every other year can get expensive :) :) .
 

Kevin70

Petty Officer 1st Class
Joined
May 24, 2006
Messages
342
Re: volvo 270-u-joint stuck.......patience.....fading.

I found a can of stuff at the boat store that's suppose to unseize anything. It was $20. Does anyone know if this stuff works? In the meantime, Iwill say a little prayer.............."Lord, if you can unstick my u-joints just this one time, I promise I will grease my spline joints every other season, Amen.
 

bomar76

Lieutenant Commander
Joined
Jun 27, 2002
Messages
1,963
Re: volvo 270-u-joint stuck.......patience.....fading.

Send me the $20.<br />I'll spend it on beer.<br />My buddies and I drinking the $20 worth of beer will have the same effect on "unsiezeing" your drive as the can of snake oil....maybe work UP TO 47.6% better.
 

510man

Cadet
Joined
Jan 7, 2006
Messages
19
Re: volvo 270-u-joint stuck.......patience.....fading.

Try spraying it with AeroKroil. This stuff really works. <br /><br />I sprayed it on 30 year old black pipe that was a drain line in the ground. All rusty with white calcium build up everywhere. Knocked off the calcium as best I could, sprayed it, let it sit over night, sprayed it again, and unscrewed it with two pipe wrenches.<br /><br />Story number two. Removed exhaust manifolds from a 1992 Mercury Sable to rebuild the heads. Sprayed the manifold studs, let it sit overnight, sprayed them again, loosened with a 1/4" rachet and removed the nuts from the studs with my fingers.<br /><br /> http://www.kanolabs.com/
 
Top