Turbo lube hubs

jippie98

Seaman
Joined
Sep 26, 2004
Messages
68
I just installed a new turbo lube hub on my trailor and it leaks. How do I fix this problem? It is a very slow leak but it does allow water intrusion......Thanks
 

craze1cars

Lieutenant Commander
Joined
Dec 26, 2004
Messages
1,822
Re: Turbo lube hubs

I assume it's leaking around the inner seal, that's what usually happens.<br /><br />The "fix" is to make darn sure you have a mirror-like finish on that axle shaft where the seal rides before you do the installation. One microscopic little groove or burr and you'll have a leak. These seals are not forgiving at all to imperfections. As mentioned, having a stainless steel sleeve instaled on the shaft so the seal has a good surface to ride on is usually the best solution.
 
Top