Trolling motor with foot pedal question. Help please. :)

Faso

Recruit
Thread starter
Joined
Aug 5, 2010
Messages
1
Newbie question about my trolling motor with foot pedal!

Hi All,

I have a 18ft tracker with a trolling motor of course. Can't seem to find this answer anywhere on the new so here goes...

The foot pedal is very STIFF. It's hard to press. It almost feels like the cable is tight or maybe even grinding in there. I have read the manual and i loosened the tention screw but it felt the same.

Is this common? I was thinking it needed to be greased or lubed up. I don't know what to do. It does work but it doesn't move like it should. It's a huge pain to fish and attempt to troll with it.

Any tips would be great!

Thanks!

Mike
 

nimmor

Petty Officer 1st Class
Joined
May 15, 2003
Messages
313
Re: Trolling motor with foot pedal question. Help please. :)

It should be a smooth movement if the tension is backed off and you shouldn't have any grinding. I mean no offense by this next question, but did you turn the screw the right way? I actually did that once, was trying to tighten it and kept thinking this thing ain't working. That is what I get for doing it upside down. You didn't mention the age but I asume it is not under warrenty. I would also check the pulleys and make sure the cable hasn't somehow came off one of them or a pulley is binding up. You may have to do this in on water where you can look at it. The way my Tracker sits on the trailer I can't lower the trolling motor all the way down, it hits the winch.
 

jonboat2

Seaman Apprentice
Joined
Jul 7, 2011
Messages
39
Re: Trolling motor with foot pedal question. Help please. :)

Periodically(if i spelled that right) spray WD-40 down the line and try to move it. If its just binding due to dirt or whatever, itll loosen it up.
 
Top