Trim Sending Unit Harness Plug Location Inside Boat

[zr8000]

I am a new boat owner and this is my first post!!!
I quickly realizing that working on boats requires a lot of physical flexibility.

I have read many of the helpful posts on how to troubleshoot the issue of a malfunctioning trim guage (pegged all the way up all the time). One problem though...I cannot find the plug for the sending unit inside the engine compartment.
My boat is a 2001 Larson 190sei with 4.3 Volvo. Where am I not looking??

Thanks for any help!

 

[mikeneal]

Re: Trim Sending Unit Harness Plug Location Inside Boat

It is a circular rubber plug back close to the transom plate. (sort of close to the steering ram from what I recall.

I am a new boat owner and this is my first post!!!
I quickly realizing that working on boats requires a lot of physical flexibility.

I have read many of the helpful posts on how to troubleshoot the issue of a malfunctioning trim guage (pegged all the way up all the time). One problem though...I cannot find the plug for the sending unit inside the engine compartment.
My boat is a 2001 Larson 190sei with 4.3 Volvo. Where am I not looking??

Thanks for any help!

 

[Don S]

Re: Trim Sending Unit Harness Plug Location Inside Boat

Just follow the wires from where they come through the transom shield. You will run into the plug.

http://forums.iboats.com/attachment.php?attachmentid=98994&stc=1&d=1308598913