Trim Relays Where to get them

ChevyReb

Seaman
Joined
May 14, 2003
Messages
52
I have a 1988 Nissan NS70A2 and the trim relays for the tilt trim are not working. There are two 4 wire relays where two wires connect to each relay from the throttle shifter tilt switch and the two wires on the load side. One is hot connected to one side of both relays and the other two wires (one from each relay) connect to the motor itself. There is also a third wwire coming from the motor that connects to ground.

I can see them in online parts catolog diagrams but they only look to be included in the diagrams for the entire trim option assembly. I cannot locate a separate PN# for just the relays. Any help is appreciated!!!!!

Are these relays still available or is there a substitute that will function correctly?

Thanks!
 

ChevyReb

Seaman
Joined
May 14, 2003
Messages
52
Re: Trim Relays Where to get them

local shop sold me a used set today they said may work if two wire motor but it is three so did not work.

Went to Radio Shack And got two $6 30 amp relays and now it works like a champ. Just need to get them mounted as they are a little smaller in size then the originals.

WhoooHoooo...TNT again!
 

papasage

Senior Chief Petty Officer
Joined
Jan 12, 2003
Messages
785
Re: Trim Relays Where to get them

i have a CMC t&t i git them at any auto parts store .the relays are used on a lot of cars .
 
Top