trim problem. plzzz help

[dloveb]

I bought a 1994 nitro bass boat. It has 110 tracker evinrude. The trim was making noise wanting to go down. I tried check my connections at the battery. And the shifter itself was loose so I tightened it back. Now the trim motor doesn't make any noises at now... So where should I start..??? Plz. Advice.

 

[dloveb]

Re: trim problem. plzzz help

Any help plzz. I'm going try mess with it tonight some.

 

[boobie]

Re: trim problem. plzzz help

Take a small hammer and rap the trim mtr a couple of times, it may have a stuck brush.

 

[dloveb]

Re: trim problem. plzzz help

Ok. I don't know what heck. Tapped it with hammer. It runs going down. But the motor latch is locked. To allow it go down..It needs to go up a bit more to get the latch to unlock. It makes no noise no clicking at all when I try trim it up. It does going down. So I'm stuck. ???? Jump the wires at switch. So what next.

 

[boobie]

Re: trim problem. plzzz help

Find the t/t relay box and swap the relays and see what happens.

 

[dloveb]

Re: trim problem. plzzz help

Ok any clue where the relays might be. So I don't have tear stuff apart looking for them.

 

[dloveb]

Re: trim problem. plzzz help

Anyone might know where the relays are located for the trim. Plzz. I looked everywhere. ?????? Plzz help