Trim Limit Wiring

[Ron R Cox]

About 10 years ago I found that the wires from my trim limit senders were rotting out on my 1985 Sea Ray Seville. So I just pulled them out and used the trailer up and down function to trim out my boat. I am now redoing the bellows and want to reinstall the trim senders. I can't remember where the wires connect to inside the boat. Any help here would be great.

 

[alldodge]

The wires are on the pump side, the gauge sender goes to ground and the gauge. The limit are placed inline with the pump

 

[Ron R Cox]

The wires are on the pump side, the gauge sender goes to ground and the gauge. The limit are placed inline with the pump

Thanks for the quick reply, I will check that out and see if I can find the wires near the pump.