Trim hoses

[Jamz33]

My friend was going to change out his trim hoses due to one leaking but before he could replace them his house was destroyed by a fire and therefore the hoses burnt up as well. He is dealing with a lot and asked me to go ahead and fix it for him. The problem is I don’t have anything to go off of as to what the hoses looked like, or fitting size, or anything like that. It is a 1988 mercury black max 150 and I have found some online, but want to make sure I have the right ones. I have pictures I can post if needed. Does anyone have a link to where I can get these? Thanks.

 

[merc850]

I thought the 1988 models used an integral trim pump/cylinder design which I see online, the hose models were from 1966-1976, maybe you should post a picture.

 

[Jamz33]

I thought the 1988 models used an integral trim pump/cylinder design which I see online, the hose models were from 1966-1976, maybe you should post a picture.

 

[merc850]

Ok you got me, I would suggest contacting a dealer with the part nr. and see what they have.
Somebody here might jump in.

 

[Fun Times]

Using the engine serial number it seems you may be looking for all of item numbers 32 as there's a port and starboard, https://www.mercruiserparts.com/bam/subassembly/28561/575/180

And/or item number 38 as there are 2 too, https://www.mercruiserparts.com/bam/subassembly/28561/575/260

All part items found here,

V-150 - 4868998 THRU 0A904645

V-150 - 4868998 THRU 0A904645

www.mercruiserparts.com

 

[Faztbullet]

Tis a 1983 model, needs all 4 hose and the tilt limit bolt as it bottoming out on cylinder

 

[Jamz33]

Would all of these hose fittings be 3/8” 24 count?

 

[Dukedog]

if ya have a hydraulic shop anywhere close would be easier and probably cheaper ta drag it down there and have 'em made.....