Tilt/Trim on Volvo Penta 275

[NewBoater 08]

Hello,
I recently purchased a 1988 Invader with a Volvo Penta 275. Everything runs well with the exception of the Tilt/Trim. I have checked the motor/relays and everything works. Upon further inspection I found the worm gear is bent and is the reason it will not work. I have been trying to find the entire worm gear and its housing online but have had no luck. I was hoping someone could point me in the right direction.
Thanks

 

[slia67]

Re: Tilt/Trim on Volvo Penta 275

Check eBay or dougrussell.com.


Doug

 

[NewBoater 08]

Re: Tilt/Trim on Volvo Penta 275

Thanks for the response...the problem is I am not exactly sure what to "look up" .....any help? thanks again.

 

[NewBoater 08]

Re: Tilt/Trim on Volvo Penta 275

exactly the parts I need but no part numbers listed on the page......can you send me the link with the part #s

 

[Mike H]

Re: Tilt/Trim on Volvo Penta 275

Yes it is go down the page Mike H

 

[NewBoater 08]

Re: Tilt/Trim on Volvo Penta 275

all I see is the image, no part numbers...thanks again for the help

 

[Don S]

Re: Tilt/Trim on Volvo Penta 275

This link should help

http://www.volvopentastore.com/MECH...*****.618920561--store_id.366--view_id.327322

 

[NewBoater 08]

Re: Tilt/Trim on Volvo Penta 275

Mike H. THanks for pointing me in the right direction....I found the part I need.

 

[NewBoater 08]

Re: Tilt/Trim on Volvo Penta 275

All- Thank you for pointing me in the right direction....I found the part on ebay as well.......