Thru Hull Fittings

[elahuta]

Hi Guy, I have an older Formula that had a thru hull plastic transducer that cracked and was leaking water in the engine compartment. (Sinking the Boat!)The transducer was not connected to anything so no loss but, here is my problem I need to fill that hole. I found a thru hull bronze fitting but, it has a hole in it to let liquid in and out. So, that will not work..
Does anyone make a thru hull plug?
If not , what are my options?

Thanks

 

[Bondo]

Re: Thru Hull Fittings

Ayuh,... What you found would work with a valve on it....

Filling it,+ fairing out with fiberglass is always an option...

 

[greg82255]

Re: Thru Hull Fittings

I'd say its better to repair the hole with fiberglass...