Temp switch gray/blk wire connection?

[dengle]

'96 Yami 200HP.

This wire connects to the CDI in my '96. It also has gry/blk lead that I believe connects up to the console and to either the gauge (overheat light) or the warning buzzer somehow. It would need to connect to both but where does it connect first?

 

[rodbolt]

Re: Temp switch gray/blk wire connection?

on the temp switches the wire will be pink and black, at the bullet connectors it changes to blk and gray/blk to the ECU. from the ECU to the console for visual overheat indicate its gray and a part of the trim send harness. the audible alarm from engine to console is part of the 10 pin main and is pink.

 

[dengle]

Re: Temp switch gray/blk wire connection?

Thanks! I hooked it to the trim send harness and also found it disconnected under the dash where it connects to the gray wire of the speedo gauge. Everything works great now.