Starter rope grommet

[Bubbles Up]

I have gone thru 2 starter ropes in the part season,I had a look tonight and noticed a few polished areas where the rope ran. Is there a way I can remove the grommet? I could possibly have a new one machined from nylon or smooth this one out so it doesn't wear the rope.Any ideas on how to remove?

 

[corm]

Re: Starter rope grommet

Hi,
You should be able to cut it out with a sawzall.

It might be easier if we knew what engine you have.

 

[Bubbles Up]

Re: Starter rope grommet

1979 Merc 7.5

 

[corm]

Re: Starter rope grommet

Hi,

The grommet (16) is held in by a c-clip (17).
You can pop the clip off with a screw driver.
Then the rope guide will pull out the front.
http://www.crowleymarine.com/mercury_parts/297/10.cfm
While your in there check the pulley (20) to make sure it spins easy.
I think you have a metal pulley, but if it is plastic replace it with a metal one.
Easier than a using a sawzall on it.