Starter kit for bf25a

[Joshed]

Has anyone ever put a starter kit (Elec.) on a pull type bf25a. Someone told me it would be cheaper to buy new mtr. is this correct? Appreciate all help.

 

[TOHATSU GURU]

Re: Starter kit for bf25a

Around $700.00

 

[Joshed]

Re: Starter kit for bf25a

Thanks 46496. my motor is BF25A #BAJE-1004909 (1996)? Model. Do they make a kit or do you have to order the individual parts for this? Just what would you neeed other than the starter, push switch,and toothed flywheel? Thanks again

 

[TOHATSU GURU]

Re: Starter kit for bf25a

That's the main three parts, but there is some additional hardware and wiring.

 

[Joshed]

Re: Starter kit for bf25a

46496----Thanks- Have you or do you know someone who has performed this mechanical fete. Also is the serial# correct? and what would the additional hardware and wiring consist of? Thanks again, Ed

 

[TOHATSU GURU]

Re: Starter kit for bf25a

Yes, I have no idea and you need to check with your local Honda dealer.

 

[Joshed]

Re: Starter kit for bf25a

46496---Thanks again---I did contact my local Honda dealer, he was set to try it? But American Honda outside Atlanta advised his against it saying it would be cheaper to but a new BF25 with Elec. Start. If this be the case I'm thru with Honda. Appreciate you help and the help of others here. I'm back to where I started.

 

[Joshed]

Re: Starter kit for bf25a

46496---Thanks again---I did contact my local Honda dealer, he was set to try it? But American Honda outside Atlanta advised his against it saying it would be cheaper to but a new BF25 with Elec. Start. If this be the case I'm thru with Honda. Appreciate you help and the help of others here. I'm back to where I started.

 

[Navigator]

Re: Starter kit for bf25a

Ed,<br />Thats not unusual for Honda. I have a 40hp tiller and inquired about a kit to change it to remote. None available although they do carry a kit from remote to tiller. Parts alone were going to cost about 1/3 the cost of a new engine. It just wasn't worth it. I wanted to change boats, but I didn't want to have to leave the engine behind. Not possible. <br /><br />Nav