rolled '97 polaris slt 780

en2 cj

Recruit
Joined
Dec 29, 2004
Messages
3
my slt 780 got rolled by genius son and his friends.<br />most everything is working fine now except for the<br />digital display. at first it was showing gibberish<br />and then went completely blank. this happened once<br />before and i found that the battery had a dead cell<br />causing the display to malfunction. tried the battery out of my other pwc but nothing. i also tried a new battery and the results were the same.<br />any suggestions on what else to check?
 

Jeff Walkowiak

Lieutenant Commander
Joined
Jun 23, 2004
Messages
1,944
Re: rolled '97 polaris slt 780

pull all the electrical conections, dry them out and look in any computer boxes for water also check your ground wires for continuity
 

mark.aa

Seaman Apprentice
Joined
Feb 2, 2005
Messages
39
Re: rolled '97 polaris slt 780

had the same fault on my old slx 780,have you put the MFD in a warm place for a few days to dry out may come back to life,it may have a leak letting in water,sould be water tight. did you blow the battery breather pipe through as any salt water entering battery will damage it.<br />open up the electrics box and check for water and check fuze,s are clean a tight in holders
 
Top