I have a roller trailer (19' center console) and want to replace all the rollers. They are in good condition, but are black rubber and leave streaks on the hull. I am going to replace them all with the yellow poly rollers. I have seen solid poly rollers out there and I have also seen a plastic hubbed/poly covered roller out there. Bass Pro has a kit with 4 of the plastic/poly rollers with hardware for about $30 a kit. (I'll need 4 kits- 16 rollers). They are 5" rollers.<br /><br /> The solid poly rollers I have found are about $9 each and would cost $144 for all 16, plus another $20 or so for hardware. These are 4" rollers. Do you think the solid would outperform the plastic/poly rollers? Better cushion? Better wear? Which one and why?<br /><br /> I'll be hauling my boat to Florida in May and will be mooring the boat, leaving my trailer emtpy and available for repairs. So, it isn't a heart attack right now. Just chime in if you have any thoughts. <br /><br />UFM82
