Replace transom components?

[richard99]

I'm removing and replacing the outdrive (Alpha One) on my 1986 Mercruiser 140. While it's all apart, I'll inspect the transom components as well. Are there any components which I should just go ahead and replace to head off any problems, and how does one identify a gimbal bearing problem - because I really don't want to have to replace it. <br /><br />Thanks in advance!

 

[Bondo]

Re: Replace transom components?

All of the Rubber..........<br /><br />And the Lower Shift Cable.........<br /><br />The Gimbel Bearing should turn as Smooth as Silk,.........<br />If there's Any Grittynest, or Play,.......<br />Change it as Well........<br /><br />And,.... If by chance you actually Use the Trim Limit Switch,+ the Trim Indicator,........<br />You'd better Replace the Wiring to them Too.........

 

[Haut Medoc]

Re: Replace transom components?

A bad gimbal bearing will be noisy. Reach in there & see if it spins freely,[no rough spots].The condition of the u-joint bellows would be something I would take a close look at, if there's any question of it's condition replace it............