I have decided to remove my Autoblend oil injection from my boat. I have seen many post on here about Autoblend, however none that are similiar to mine. My unit has only 2wires a red/power and black/ground wire, no other wires, and has the fuel line in and one out to the motor. What I did was disconect the wires from the battery, connected the fuel line straight from the tank to the engine. I will mix my fuel from now on, however my questions are:
Did I do this correct?
Is there anything else I should do or check?
Thanks all replies are appreciated
Did I do this correct?
Is there anything else I should do or check?
Thanks all replies are appreciated