Rebuild 60 Evinrude / Upgrade to 70 or 75 Possible

Graybill

Recruit
Thread starter
Joined
Jul 22, 2003
Messages
3
I have a 60 hp Evinrude. Serial# 02565701 Model#TE60TLES. This, I am told is a 1989 model. The dealer told me the compression is 100 90 and 100. A rebuild shop told me I should have around 125 in all cylinders? The motor starts fine, Idles fine and runs fine. Is this motor in need of a rebuild. If so, cane it be upgraded to a 70hp or 75hp. The shop manual indicates the bore and stroke are the same. What makes the extra power? How do you know what the real red-line is for the motor?
 

snapperbait

Vice Admiral
Joined
Aug 20, 2002
Messages
5,754
Re: Rebuild 60 Evinrude / Upgrade to 70 or 75 Possible

I'd De-Carb the engine and re-check the compression... As long as your 100psi or above, your ok... 100 90 100psi,my opinion, run it till it pukes...<br /><br />Extra power, I dunno.. Probably a little more timing advance and larger carb...<br /><br />Red Line... My 86 70hp would run 6000rpm all day and it was happy there...
 
Top